CLOSE
关闭
PAINT& STAIN


How to prevent oil paint traces

The intersection traces of the paint ring are shown as darker colors or increased gloss, with wet and dry layers overlapping during paint application. Keeping the "wet edge" is the key to avoid grinding paint. When painting, you need to move fast enough to merge the intersections together.




Why there are paint traces

·Poor property of spreading evenness of paint

·Paint is too thick, etc.

·The overmuch numbers of paint brush or the brushing is uneven, too hard, or not clean

·High temperature or wind blowing causes the product dries fast.

·The inferior coatings are used with too little paint

·With the coating porous surface, infiltration is faster, making the paint dry fast




How to prevent paint traces

Use the following methods to prevent traces of overlap joint  as follows:

·Brush and roll from "wetness to driness" instead of contrary, so as to produce a smooth, even appearance

·When the base material is very porous, by using a primer or sealant to seal the surface and form a uniform porosity.

·Use enough paint with the right speed to ensure uniform application

·Paint with manageable area size to maintain "wet edge"


How to keep the wet edge

Keep the "wet-dry" new brush area quickly brush the edge of the rolling the rewetting zone and prevent paint traces.

Plan to rest at natural breaks, such as windows, doors or corners when painting.

Use high-quality coatings and apply according to the instructions to avoid grinding.

Recommended paints: Covering Power,Alkali Resisitant, and Kids Paint Acrylic




Back