CLOSE
关闭
PAINT& STAIN


How to solve wall bubble

When the paint film rises from the bottom surface, blisters or bubbles will appear. The paint is stirred immediately, the roller is used to paint too fast or too much. The aint on the porous surface has no primer. The loss of adhesion between the paint film and the surface is usually caused by heat, moisture or both. This will eventually lead to exfoliation.


Why there are bubbles

Paint is made on the wet, dirty or hot surfaces.

With the nncoated primer,the  temperature is high.

The outer layer of the roller has wrong length of villus.

There is excessive water.

The latex paint is exposed to moisture shortly after drying.


How to prevent paint bubbles

The surface should be clean and dry.

Apply primer sealant should be painted to any stain and let it dry completely.

Apply new sealant to the latex primer.

Avoid painting under high temperature or high humidity.

Let the paint completely dry and then expose the surface to a humid environment.




How to repair bubbles

"If the blisters don't fully reach the substrate, scrape and polish the bubbles away. The surface is polished and smooth. The finishing coat of Primer Sealer Latex is painted before the excellent acrylic based emulsion

Covering Power and Kid Paint Acrylic  is applied. The primer is applied to improve adhesion, inhibit mold production, and durability."

If blisters affect the substrate, remove the wet air sourceas as much moisture as possible.

Repair the loose joint filling payings and improve vents or exhaust fans to reduce humidity in the house.

Recommended Paints: 65-026 Primer Sealer Latex/65-406 Kid Paint Acrylic/65-130 Covering Power/65-140 Covering Power.




Back