CLOSE
关闭
PAINT& STAIN
Project Suggestions
How to paint the wall

Before painting, we suggest that you check the wall body and wall surface to find out the problem and take remedial measures, so that the problem will occur after the painting is completed, otherwise you will fail.



Step 1 : Select the tool

The right tools are important. This is what you need.

·High-quality roller sleeves and handles

·Hairbrush

·A Set of large tray

·Protection film

·Extension rod and ladder


Step 2 : Prepare the wall

Starting with cleaning, prepare the walls of the room is always essential for the successful completion of the painting. Most locations can be cleaned with sponge and warm water. If it is moldy, make sure that it is completely removed.




Step 3 :Protect the unpainted area and install the decorative lighting

Step 3 : Protect the unpainted area and install the decorative lighting

Install the indoor downlights and spotlights first. After the downlights have been mounted, the lamp is turned on to check the flatness, fineness and marks of the sandpaper of the wall again. The position of the honeycomb eye is repaired with putty paste. After dry grinding, the position is repaired with primer.


Step 4 : Brush

When brushing, the film for card mount of the small tray should be replaced, and the small doffer roller or brush should be used to collect the corner position, and the gypsum line, etc. With the telescopic rod roller painting. We should note that the oil absorption rate of the painting on the tray is consistent each time, which is beneficial to the uniformity of the painting on the wall, to scroll up and down.


Step 5 : Drying, repainting, checking, and drying

We recommend that your finishing coat products be painted with at least two layers to achieve the best leather and color development. After about 4 hours of rolling the first finishing coat under normal humidity conditions, the second finishing coat can be rolled after the paint is dry by touching the table with hands.



Back